Sunday, February 12, 2017

Setting up a D-Star Access Point on Raspbian with PIXEL - Part II

This is part II of a two Part series. In part I, DStarRepeater and IRCDDBGateway were compiled and DstarRepeater was configured on Raspbian Jessie with PIXEL.  In Part II, IRCDDBGateway will be configured,and an Icom ID-51a+ will connect to the D-Star network through the D-Star hotspot.

Elizabeth Tower at the North end of the Palace of Westminster in London


Requirements


Directions


Configure ircddbgateway


Execute ircddbgatewayconfig on the target (Raspberry Pi) as follows.


pi@hbox:~ $ sudo ircddbgatewayconfig &






Replace KF5SVQ with your call sign.


Make sure that you select Save from the File Menu in order to save your changed to the configuration file.   Also make sure that you select Exit from the File menu after you select Save.

Start ircddbgateway and dstarrepeater

pi@hbox:~ $ sudo ircddbgateway &
pi@hbox:~ $ sudo dstarrepeater &



Configure the Radio 


Link to the UK D-Star Megarepeater

D-Pad -> Repeater List -> Simplex -> 145.67 DV
Press PTT
D-Pad -> Local CQ
Hold Down PTT and Talk

Setting up a D-Star Access Point on Raspbian with PIXEL - Part I

This is part I of a two Part series. In part I, DStarRepeater and IRCDDBGateway will be compiled and DStarRepeater will be configured on Raspbian Jessie with PIXEL.  In Part II, IRCDDBGateway will be configured and an Icom ID-51a+ will connect to the D-Star network through the D-Star hotspot.

Purpose


Create a hotspot or access point for a handheld radio in order to connect to the D-Star network.




Requirements





Definitions


Host - Your Desktop computer (Linux)
Target - Raspberry Pi 3 running Raspbian Jessie with PIXEL (Linux)






Directions


Write the Raspbian image to the uSD on the host.  Execute the following commands on the host.

dev@fedora:~ $ sudo umount /dev/sdb*
dev@fedora:~ $ sudo dd if=2017-01-11-raspbian-jessie.img of=/dev/sdb bs=1M

Boot the Pi with the uSD card.  Execute the following commands on the Pi.

pi@hbox:~ $ apt-get install libwxgtk3.0-dev libusb-1.0-0-dev
pi@hbox:~ $ mkdir ~/src
pi@hbox:~ $ cd ~/src
pi@hbox:~ $ git clone https://github.com/dl5di/OpenDV.git -b master
pi@hbox:~ $ cd OpenDV/ircDDBGateway
pi@hbox:~ $ ./configure
pi@hbox:~ $ make
pi@hbox:~ $ sudo make install
pi@hbox:~ $ cd ..
pi@hbox:~ $ cd DStarRepeater
pi@hbox:~ $ ./configure
pi@hbox:~ $ make
pi@hbox:~ $ sudo make install
pi@hbox:~ $ sudo mkdir -p /usr/local/etc/opendv
pi@hbox:~ $ sudo mkdir -p /usr/local/var/log/opendv


Configure DStarRepeater


Execute dstarrepeaterconfig on the target as follows.
















Replace KF5SVQ with your call sign.